What's new
A bug-fix release for the radio only: the X6100 Link 0.2.4 app keeps working, I'll update it later.
## How to update
- **From the radio:** Settings › System › Updates. For 0.2.2, 0.2.3 and 0.2.4.
- **From the microSD:** write `x6100-link-0.2.5-sdcard.img.xz` with balenaEtcher.
- **If the radio does not respond after the update** (frequency frozen, no S-meter), switch it off and on again.
## Fixed
- **Data from the PC (WSJT-X and similar):** the radio keeps the power below the set level by itself, 7 W at most, even when the PC audio is too strong, and remembers the level after power-off. If the power goes well over 7 W for more than one second the transmission stops with a warning. When the input audio is too high the radio tells you: lower the output level of the program or of the computer, or every transmission starts with power peaks.
- **The radio's own FT8:** the power is right again after a TUNE.
- **Black or garbled screen** on some radios: new entry Display › Graphics acceleration. When off, the radio draws the screen with the CPU only, as in 0.2.1. It switches off by itself after two starts in a row that ended badly; with a black screen, hold A/B and V/M together for 3 seconds, or write `gpu=off` in the `x6100-display.txt` file on the card from a PC.
- **Tuner:** the "not tuned here" notice shows only when it is really needed.
- **Power calibration:** possible from 11 V.
## What changes
- **Language:** now a direct entry of the Display menu.
- **Cooler radio in receive:** with nothing touched the GUI does about a quarter less work.
- **Charger:** for new users it starts in "Shadow", charging the battery only while the radio is off, so it does not heat up in use. Change it in Settings › Power › Charger.
What's new
This is the biggest release since 0.2. Under the interface you know runs a completely new system that I wrote from scratch: the radio starts in half the time and is more stable. Thanks to OpenX6100, where the earlier versions started from.
## Before you update
- **Update the radio and the app together.** The radio and the X6100 Link app 0.2.4 work as a pair: if you update only one, some features won't work.
- **Make a backup** from the radio's web page (Backup and updates). The update keeps settings, memories and logs, but an extra copy never hurts.
- **Update from the radio**, as usual: Settings › System › Updates. This works from 0.2.2 or 0.2.3.
- **After the install** the radio switches itself off. If it stays on "Switching off" for more than a minute, hold the power key: the update is already complete.
- **At the first start** leave it on for about ten minutes, on the power supply or with the battery above 60 %. In that time it also updates the card's boot loader by itself.
## What's new
- **Starts in 7-8 seconds** instead of 14, with an animated logo.
- **CW keyer and Voice keyer in the app**, with two big keys under PWR and FILTER: tap a message and it goes, and STOP is always there.
- **Voice keyer from the browser:** upload any audio file, rename it, drag it into place. All messages play at the same loudness.
- **Your own frequency in every digital mode**, not just FT8: PSK, RTTY, JS8, SSTV, WeFax and the others.
- **RIT and XIT** by holding the MFK knob.
- **BOTA** (Beaches On The Air) next to POTA, SOTA, WWFF and HOTA, with a progress bar when you download the lists.
- **You can play back recordings** on the radio, and the recording scheduler now lives inside Broadcast.
- **Several programs at once:** the app, the web page and WSJT-X can all control the radio at the same time.
- **In the app:** full screen, memory management, the FT8 slot countdown. Audio moves to headphones or earbuds by itself when you plug them in.
- **Settings menus reorganised**, easier to find your way around. Some items have a new name ("Separate VFOs", "SWR guard", "Spur finder", "VOX guard"), but your settings stay the same.
## Good to know
- **CAT over USB is off by default.** If you use WSJT-X, a logger or wfview, switch it on once in Settings › Network and Bluetooth.
- **The volume has a new scale:** today's 100 is the old 60, above that the speaker distorts.
- **SSTV and WeFax:** automatic callsign reading in SSTV pictures and WeFax chart clean-up come back with 0.2.5.
## Fixed
- **FT8 and the other digital modes** transmit at the right power. With audio from the PC you no longer go over 7 W, not even at the start.
- **In SSB** the power is back to what you set.
- **CW** no longer locks up after 30 seconds.
- **With CAT over USB** every transmission goes out.
- **The sudden black screen** on some radios is gone, and if the graphics ever hang they restart by themselves.
- **The silent radio part** after 0.2.2 or 0.2.3 on some radios no longer happens.
- **Audio** comes back at once when you raise the volume or the squelch opens. Bluetooth headphones follow the VOL knob.
- **The radio runs cooler**, the S-meter is calmer and the battery shows the right percentage.
- **The app** no longer jumps with the VFO. If the radio doesn't answer it says so, and offers "Forget radio and pair again".
- **The SOTA, POTA, WWFF and HOTA lists** download fully again, and Field Ops opens at once.
- **A paired Bluetooth device** is no longer forgotten at restart.
- …and plenty of small fixes all around.
Thanks to everyone who sent reports and diagnostics: many of these fixes come from them.
73, Giovanni IU1WXY